EPRO UES815S-24AR Power Supply Module

Technical Specifications

Model:UES815S-24AR

Brand:EPRO(Emerson)

Input:100~240V AC

Output:24V DC

Output power:15W

Mounting:Rack plug-in installation

Protection:Overvoltage,overcurrent,short circuit,overheat protection

Operating temperature:-20~+60℃

Relative humidity:5~95% non-condensing

Weight:0.65kg

Certification:CE,API670 compliant

System compatibility:Matches EPRO MMS6000 TSI rack system,supplies power for vibration,displacement and speed monitor modules,for steam turbine,compressor,generator TSI protection system.

Function:Rack type power supply module,converts AC input to stable 24V DC output,supply power for all MMS series monitoring modules inside rack. Built-in multi-protection circuit to avoid module damage under abnormal power condition.

Installation:Plug into MMS6000 rack slot,hot swappable. Connect AC power source to the terminal on front panel.

Interface:

‑AC input terminal

‑DC backplane bus output

‑LED indicator for power status and fault alarm

Circuit feature:Switch mode power supply design,high efficiency,low ripple,strong anti-interference for turbomachinery harsh industrial environment.

Feature:EPRO UES815S series TSI rack power module,24=24V output,R=revised version. Used as power source for MMS6000 rack. Common faults:internal circuit burnout,output voltage abnormal,indicator failure. Confirm rack compatibility before replacement.

Diagnostic:Module fault leads to no DC power output,all rack monitoring modules stop working,trigger system power failure alarm.

Built‑in function

UES815S-24AR provides stable DC power supply for rotating machinery TSI monitoring system,widely used for power plant TSI spare replacement.

Product Brief

UES815S-24AR belongs to EPRO TSI rack power supply family,plug-in 24V DC power module for MMS6000 system. Verify rack version before ordering. Check output voltage and indicator status during commissioning. Widely applied for steam turbine,compressor and generator condition monitoring. ESD anti‑static protection shall be followed during installation.