SIEMENS MOORE 16133-79/10 Standard Analog Module

Technical SpecificationsModel:16133-79/10 Brand:SIEMENS MOORE Product Type:SAM Standard Analog Module System:QUADLOG / APACS+ DCS System Power Supply:24V DC Signal Type:4-20mA current, ±10V voltage analog I/O Mounting:Rack mount Operating temperature:-20℃ ~ +70℃ Storage temperature:-40℃ ~ +85℃ Relative humidity:5%~95%, non-condensing Weight:2.05kg Dimension:51mm279mm330mm

System compatibility16133-79/10 is compatible with SIEMENS MOORE QUADLOG safety instrumented system and APACS+ distributed control system. It works with QLCCM safety controller, ACM controller series and matched marshalling termination boards for analog signal acquisition and control output.

FunctionThis SAM standard analog module collects 4-20mA / ±10V measurement signals from field transmitters and outputs analog control signals to regulating valves. It handles pressure, temperature, flow and liquid level analog signals, supports signal scaling, filtering and per-channel fault diagnosis. It transfers data to system controller through backplane bus for closed-loop process control.

InstallationPower off the rack chassis before installation. Insert the module into designated rack slot and lock the front latch. Connect ribbon cable between module and marshalling termination assembly, wire field transmitters and control valves to terminal blocks. Configure channel range and scaling parameters via QUADLOG / APACS engineering software after power restoration.

InterfaceBackplane bus connector, ribbon cable port for marshalling board, front LED indicators for power, run, fault and individual channel status.

FeatureMulti-channel standard analog I/O module, dual signal type support for 4-20mA and ±10V, built-in signal conditioning, overrange detection, per-channel self-diagnosis, galvanic isolation. Obsolete legacy spare part, used for QUADLOG / APACS+ DCS analog control loop maintenance and replacement.

DiagnosticNo power: check rack 24V DC power supply and backplane contact. Channel signal abnormal: inspect field instrument loop power, cable wiring and channel scaling setup. Module fault: read diagnostic codes via QUADLOG / APACS engineering software, check front LED indicators.

Product BriefSIEMENS MOORE 16133-79/10 is QUADLOG series SAM standard analog I/O module, widely used in petrochemical, power and pulp & paper industries for process analog signal collection and control output.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.