Extreme Networks SSA-G1018-0652 S-Series Standalone Switch

Technical SpecificationsModel:SSA-G1018-0652 Brand:Extreme Networks Product Type:1U rackmount standalone managed Layer3 switch Ports:48 × 1000BASE-T SFP slots,4 × 10GBASE-X SFP+ uplink slots OS:EOS (Enterasys Operating System) Redundancy:Hot-swappable dual power supplies and fan trays Management:Serial COM port,Micro-USB debug port,out-of-band management Operating temperature:5℃ ~ +40℃ Storage temperature:-30℃ ~ +73℃ Relative humidity:5%~95%, non-condensing Weight:11.79 kg

System compatibilitySSA-G1018-0652 belongs to Extreme Networks S-Series S150 standalone switch family, formerly Enterasys. It supports Extreme validated SFP copper transceivers and SFP+ 10G optics. Designed for enterprise aggregation and high-density wiring closet deployments. Widely used for legacy network spare replacement.

FunctionSSA-G1018-0652 provides high-density gigabit access with 10G uplink capability. It supports full L2/L3 switching,static routing,VLAN,STP/MSTP,LACP,ACL,QoS,IGMP snooping and SNMP. It monitors port status,DOM optical parameters,module temperature,fan speed and power supply health. Used for aggregation layer network construction.

InstallationMount the unit on 19-inch 1U rack. Install redundant power supplies and fan trays. Insert SFP copper transceivers and SFP+ uplink modules. Connect copper cables and fiber uplink cables. Connect console port for EOS configuration. Verify system boot,module online status and port connectivity before putting into production.

Interface48×1000BASE-T SFP slots,4×10G SFP+ slots,COM serial port,Micro-USB debug port,system status LEDs,PSU and fan bays,reset button for Extreme Networks SSA-G1018-0652.

FeatureOriginal Extreme Networks S-Series S150 standalone 1U switch,hot-swappable redundant power and fans,high port density,DOM transceiver monitoring,EOS operating system,built-in real-time diagnostic function. This spare supports enterprise aggregation and high-density wiring closet network deployment.

DiagnosticSwitch fails to boot: check PSU installation and AC power input. Port no link: verify SFP copper transceiver and Cat5e/Cat6 cable. SFP+ uplink failure: check SFP+ module,fiber cable and port admin status. Transceiver no DOM data: confirm Extreme validated optical transceiver. Over-temperature alarm: inspect fan tray operation and clear dust.

Product BriefSSA-G1018-0652 is Extreme Networks 1U rackmount S150 standalone Layer3 switch with 48×1G SFP and 4×10G SFP+ uplink ports,classic spare part for enterprise aggregation network overhaul.

DisclaimerAll parameters are for reference only and shall not be used as the basis for quotation. Goods are scarce, overseas delivery lead time is 3-7 working days. It is only used for equipment maintenance and renovation.