HIMatrix F8627X 984862765 Communication Module

Technical Specifications

Model:F8627X,Part No:984862765

Brand:HIMA(HIMatrix)

Safety certification:SIL3,IEC61508

Interface:2×RJ45 100Base-T Ethernet,RS485

Supported protocol:SafeEthernet,Modbus TCP,OPC DA

Mounting:Plug-in rack installation

Protection class:IP20

Operating temperature:-20~+60℃

Weight:0.45kg

Certification:CE

System compatibility:Matches HIMA H41q/H51q and HIMatrix safety controller,connect safety CPU with DCS/SCADA,for petrochemical,chemical plant ESD emergency shutdown and F&G fire gas system.

Function:Safety communication module,realizes high-speed safe data transmission between safety controllers,supports online programming via Ethernet,transmits interlock signal and diagnostic information.

Installation:Insert module into HIMA rack slot,connect network cable to RJ45 port,set station address by DIP switch.

Interface:

‑Dual RJ45 Ethernet ports

‑RS485 serial port

‑LED indicator for run,fault and communication status

Circuit feature:Dual channel safety circuit design,continuous self-diagnosis,anti-interference,ensure safety data transmission not affected by field noise.

Feature:HIMatrix F8627X safety ethernet module,part number 984862765.Used for safety network communication. Common faults:communication interruption,port damage,hardware circuit failure.Confirm system firmware version before replacement.

Diagnostic:Module fault leads to communication interruption,safety network offline,trigger system communication fault alarm.

Built‑in function

F8627X 984862765 realizes safety data communication for SIS emergency shutdown system,widely used for chemical and power plant safety spare replacement.

Product Brief

F8627X 984862765 belongs to HIMatrix safety communication module family,plug-in SIL3 ethernet interface card for HIMA safety system. Verify rack and firmware compatibility before ordering. Check network connection and communication status during commissioning. ESD anti‑static protection shall be followed during installation.