KEBA BC-082 Master Slave Controller Module

Technical Specifications

Model:BC-082

Brand:KEBA

Product type:Master slave controller module

Power supply:24 Vdc,max 1.2A

Control function:Machine logic processing,master-slave communication coordination,real-time motion control,data exchange,hardware self-diagnosis,fault alarm

Communication:CAN bus,Ethernet,internal backplane bus

Mounting:Plug-in rack mounting

Operating temperature:-10~55℃

Storage temperature:-20~70℃

Relative humidity:5~95% non-condensing

Max working altitude:2000m

Weight:0.32kg

Dimension:160mm95mm30mm

Certification:CE

Protection class:IP20

System compatibility

BC-082 belongs to KEBA KePlast control system family,matched with KEBA I/O modules and operator panels.Widely applied in injection molding machinery and automated machinery control cabinets.This is a discontinued legacy controller module for equipment maintenance spare replacement.

Function

BC-082 serves as KEBA master slave controller module.It undertakes master-slave data synchronization and real-time logic calculation for plastic machinery.It communicates with I/O modules and servo drives via backplane and CAN bus,coordinates multi-axis motion sequence.It supports high-speed data interaction between master and slave controllers and feeds hardware fault information back to host system.It is the core coordination control component of KEBA machinery control system.

Installation

Insert BC-082 into the designated rack slot and lock the latch.Complete power,bus and signal wiring according to wiring drawing.Check 24V power polarity and cabinet grounding before power-on.

Interface

‑Rack backplane connector

‑CAN bus port

‑Ethernet communication port

‑Status and fault LED indicator

Circuit feature

Isolated control circuit,built-in ESD and surge suppression design.Stable high-speed data transmission,strong anti-interference performance for industrial cabinet environment.

Feature

BC-082 is obsolete KEBA series spare part.Typical failures include communication interruption,logic operation abnormality,indicator fault.Check module circuit and connector pins before replacement.This module must match corresponding KEBA rack system,direct substitution without inspection is not recommended.

Diagnostic

When communication failure or internal hardware fault occurs,the module uploads fault information to host controller and lights up fault LED.

Built‑in function:Master-slave coordination,logic control,multi-axis data synchronization,self-diagnosis and fault alarm,used as KEBA KePlast series controller module spare replacement.

Product Brief

BC-082 is KEBA old industrial series master slave controller module for injection molding machine and automated production equipment.Confirm KEBA rack and system matching before ordering.ESD protection required during handling and installation.